Basic controller „sMove“ – ventilation control for more lightness and comfort of living

Available at the fair BAU 2017 – plan and place your preorder now.

Efficient and very intuitive in operation, our new comfort controller „sMove s4“ and „sMove s8“ enable the convenient adjustment of inVENTer's decentralised ventilation devices. The new generation of ventilation control completely forgoes switches and satisfies with a flat an compact controller unit instead – for the easiest handling. Moreover, you are able to define how much airflow there is at what time in your house- regardless whether it is a living- or business room, an old or brand new building, souterrain areas or rooftop storeys. The modern optics in white blends into every living ambiance discreetly and stylishly. A replacement of your current ZR-controller is unproblematically possible starting in January.

The „s4“ controlls up to four, the „s8“ up to eight ventilation unit in a flat  or living unit. Therefore, it is now possible to adjust all devices of your decentralised ventilation system with only basic controller. Change the operation mode fast and uncomplicated, according to whether you might want to save valuable heating energy in heat recovery mode or profit from fast air exchange in ventilation mode.  Even a pause-function of 60 minutes is incorporated, which is suitable as sleep mode in the bedroom. Next to the standard "On/Off"- function, the device contains a "Flat"-version, which is especially attractive for landlords or tenants due to the permanent ventilation level in their estates. Additionally, the operation hour count proves the actual ventilation duration, if necessary.


Intuitive Handling

The operation of the ventilation control sMove is, as for all our products, self-explanatory. It contains the extraordinary feature, namely the "Touch & Slide“-function: The clearly structured and capacitive touchpad enables the uncomplicated choosing of predetermined ventilation levels, the pause-function and the ventilation mode. The capacitive slide bar even allows the stepless adjustment of ventilation intensity – the decentralised ventilation by inVENTer is adjustable to your individual day-to-day life.


Ventilation control with an ideal sensor implementation


The CO2-Sensor CS1, the hygrostat HYG12 for the adjustment of the relative humidity in the air or further external sensors can easily be implemented via points of intersection. This enables a  demand-driven ventilation. Safety precautions like pressure controllers are also a possibility. The CO2-surveillance of the CS1 sensor actively counters weariness, smell-inconveniences and mood disorders. A healthy living climate  is automatically assured.  Anyone with a home control system is able to add the inVENTer ventilation controllers and operate it from there.


Easy installation – ingenious decentralised ventilation

Your new basic controller is installed in only a few steps. You will receive an complete package, power supply for the operation included. An ensemble of individual electronic components is not required. The mains adapter is available in two variations – as a flush mounted adapter or for the integration into the electrical cabinet. There is also a selection of mounting boxes for flush mounting or cavity wall mounting.


Operation and controlling of decentralised ventilation

Important: If you wish an exchange of your installed controller-unit (ZR8, ZR10-D, ZR31) for a new basic controller for your project or planned project, please contact us immediately.


Further details


  • s4: Controlling of up to 4 x iV14/iV12-Smart resp. 2 x iV-Twin/iV25
  • s8: Controlling of up to 8 x iV14/iV12-Smart resp. 4 x iV-Twin/iV25
  • Exchange of existing ZR-Controllers possible
  • Installation - video available in january 2017

Comments (0)

No comments found!

Write new comment

×