The humidity in living spaces has an impact on well-being and health. An overview of humidity regulation and the optimal room climate.Continue reading
Guide to mold in the apartment – from the causes to renovation. Here you will find comprehensive information on mold in living space: causes, development, types of mold, health effects, prevention, mold remediation and tenancy law.Continue reading
Moisture is a prerequisite for mold growth. Structural conditions and a lack of ventilation can easily lead to moisture and thus to mold. Here you will find all the information about the causes and development of mold in the home.Continue reading
The appearance, occurrence and characteristics of the most common types of mold that are toxic to humans can be found in our guide on the types of mold in living spaces.Continue reading
Respiratory diseases, asthma, mold allergy, headaches, exhaustion, infections or cancer – the list of health hazards caused by mold is long. You can find out more here.Continue reading
Avoid mold in your home with simple measures. Correct heating and ventilation in particular prevent mold growth. In this chapter you will learn more about preventing mold.Continue reading
In the case of slight mold growth, immediate measures can help. If the mold infestation is more severe, suitable specialist companies should be contacted. Here are a few tips for mold remediation.Continue reading
Mold in the rented apartment is a major annoyance for tenants and landlords. The advisor clarifies who has to bear the costs of the renovation.Continue reading
Find out which symptoms a pollen allergy causes and how hay fever can be relieved through medication, diet and proper ventilation.Continue reading
Regulated air conditions for chimney and ventilation
Fireplace stoves are very popular because their blazing fire ensures relaxation and cozy warmth. A fireplace also looks really chic. No wonder, then, that the stoves are increasingly at the top of the wish lists of building owners. However, there are special requirements to be considered if you have a ventilation system or are considering installing one. The connection between chimney and ventilation, if done incorrectly, can present risks – precisely when negative pressure arises in the room. A chimney can enrich the air in the room with carbon monoxide. The reason for this is the different physical modes of operation of ventilation and chimney. Therefore, careful planning is recommended to you. The best thing to do is to consult ventilation system builders, chimney manufacturers and chimney sweeps. The chimney sweep in particular decides which measures should be taken to ensure the safe operation of fireplaces with ventilation systems.
Receive free support from inVENTer for your chimney ventilation
Subscribe to inVENTer’s free info mails
Room air-independent fireplace vs. room air-dependent fireplace
Wood-burning stoves require a sufficient supply of air for efficient combustion of wood, coal or pellets. There are two installation variants for this:
In the case of a fireplace that is independent of the ambient air, the air is supplied from the outside via an extra connection. This is done, for example, via a so-called air-exhaust chimney, which leads the air from the chimney to the chimney in an extra duct. The fireplace also has an outside air seal and tight, self-locking doors that prevent pollutants from escaping, even if there is negative pressure. If you want to be sure that your fireplace meets these standards, choose a device that is certified by the Deutsches Institut für Bautechnik (DIBt). In concrete terms, this means that the fireplace has DIBt approval.
In room air-dependent models, the air for the combustion of the fuel is taken from the room in which the fireplace is located. You do not need an external connection for the air supply, you can install the chimney on a common flue pipe connection.
Health effects: How the combination of a room air-dependent fireplace and ventilation system can lead to carbon monoxide poisoning
If a room air-dependent fireplace is operated together with a ventilation system, it can happen that the ventilation system sucks more air out of the room than flows in. This creates negative pressure. Since air seeks the easiest energy balance, the chimney reverses its flow direction. This means that smoke gases can get into the living space. There is a lack of air and an accumulation of carbon monoxide can result.
Carbon monoxide is odorless, tasteless, invisible and therefore extremely treacherous. In addition, there are unspecific physical symptoms such as headache, dizziness, nausea, irritability and drowsiness. We often suspect no carbon monoxide poisoning behind this. Carbon monoxide prevents the body cells from being supplied with sufficient oxygen. The body suffocates from within, so to speak.
You feel breathless, you may get cramps and you lose consciousness. Until then, there is little time and action must be taken quickly. Emergency doctors treat such poisoning with high-dose oxygen, which kicks the carbon monoxide out of the bloodstream.
Installation rules for chimneys with a ventilation system according to DIN 1946-6
But it shouldn’t get that far. That is why there are installation rules for the joint operation of the fireplace and ventilation system, which are laid down in supplement 3 of DIN 1946-6 – Ventilation of residential buildings. Supplement 4 shows examples of installation options.
The rule is: If a room air-dependent fireplace is operated with a ventilation system, the differential pressure between the outside and the installation room must not exceed 4 Pascal. A differential pressure of up to 8 Pascal is permissible for a fireplace that is independent of the ambient air. In doing so, the installer can use calculations or measurements to prove that the permissible differential pressure is being observed.
The following scenarios are possible for the safe operation of ventilation and chimney:
The ventilation system and chimney are not operated together
A safety device (e.g. pressure monitor) ensures safe joint operation of a chimney with a ventilation system
Safety device: pressure monitor for ventilation system
A possible safety device for operating the chimney and ventilation at the same time is a DIBt-certified air pressure monitor.
It switches off the ventilation system in the event of a negative pressure until the pressure conditions in the room are equalized.
The pressure monitor measures the pressure in two different ways, depending on the model: In the first variant, it compares the pressure of the outside area with that of the inside area. These pressure switches can be active all the time or only when the fireplace is blazing.
In the second variant, the pressure switch compares the room pressure with the pressure inside the chimney. He only works when the fireplace is on. Other pressure monitors only become active when the chimney is burned. To prevent incorrect measurements and incorrect shutdowns.
If the pressure monitor registers irregularities, it automatically switches off the ventilation system. This means that no negative pressure can arise through the ventilation. The pressure switch is checked and approved by the chimney sweep. In this way you meet the legal standards and the devices run perfectly coordinated with one another.
Are there differences between central and decentralized ventilation systems in simultaneous chimney operation?
In winter, when the ventilation system is running in frost protection mode, some central ventilation systems transport more warm air out of the room than can flow through the system. For the operation of the chimney and ventilation, this means that the air pressure stabilizer starts up more frequently and the ventilation stops more quickly.
One advantage that decentralized fans have when heating the fireplace at the same time is that they are usually operated in pairs. This ensures a balanced air volume flow between the supply and exhaust air. The pressure monitor only steps in in an “emergency” when there is a need to pause the ventilation.
Conclusion: chimney and ventilation – this is how they work safely
If you want to operate a room air-dependent chimney with a ventilation system at the same time, an air pressure monitor must be installed that switches off the ventilation system when the pressure drops below 4 Pascal.
If you have a fireplace that is independent of the ambient air, it can be operated together with a ventilation system if the fireplace has been checked for leaks by the DIBt. In addition, the differential pressure may not exceed 8 Pascal. You can prove with arithmetic or measurement that this is observed.
In the end, the chimney sweeper who releases the fireplace has the last word.
Do you have a fireplace and are planning to retrofit a ventilation system? Or do you want to install ventilation and chimney at the same time? Talk to the inVENTer ventilation experts. They advise in detail and find a suitable solution for you.
Receive free support immediately with the inVENTer info mails
Other topics that may also interest you: