inVENTer iV14R-Corner

For the window reveal

  • almost undetectable on the external walls
  • up to 89% heat recovery
  • suitable for insulated external walls
  • Description


    With the inVENTer iV14R Corner, our customers are given an intelligent solution to ventilate their homes around the corner. This system is especially suitable for additional insulation in the course of a restauration.
    The wall breakthrough is to be located near the window to enable the supply and extraction of air, through the air ducts, in the insulation and the grille in the window reveal. The flat duct is then installed in the insulation towards the window reveal.


    Contents of delivery

    inVENTer iV14R-Corner


    The inVENTer iV14R-Corner consists of:

    • a round wall sleeve, cut for the respective wall thickness
    • a flat duct
    • a cartridge with ceramic heat accumulator and reverse fan
    • a sealable inner cover (round or square) with dust filter
    • a powder coated, stainless steel weather protection hood in grey or white (more colors on request)
  • Technical details

    • Air volume flow: m³/h 11.4-26.6
    • Extract air performance: m³/h 22.8-55
    • Heat provision level: up to 0.89 (89%)
    • Power consumption: 1-3 W
    • Wall opening in mm: Ø 210
    • Wall thickness in mm: >230 +>120mm insulation
    • Standard sound level difference: (dB) 42
    • Sound emission (dB (A)): 20-39
    • Energy efficiency category MZ/ZR: A/A
    • Temperature range in °C: -20 to +50 °C
  • Downloads

    Product overview
    inVENTer product overview »

    inVENTer information prospectus (short instructions, maintenance manual)
    inVENTer information prospectus »

  • Accessories

    • Inner cover R-D290, white- RAL9010 SDE
    • Inner cover Flair V-233x233, white SDE
    • Sound mat iV14
    • Sound insulation insert IB-R-D290
    • Dust filter inner cover R-D290 (2x)
    • Dust filter inner cover V-284x284 (2x)
    • Dust filter inner cover Flair (2x)
    • Pollen filter inner cover R-D290 (2x)
    • Pollen filter inner cover V-284c284 (2x)
    • Pollen filter inner cover Flair (2x)
    • Fine filter inner cover R-D290 (2x)
    • Fine filter inner cover V-284c284 (2x)
    • Fine filter inner cover Flair (2x)
    • Round cable (33m, 3 wire)
    • Self-adhesive fabric tape, 50m x 48 mm
    • 2 component foam (businesses only)
  • Upload für Architekten

    Please confirm captcha to proceed.


    Graphics for the inVENTer iV14R-Corner
    DXF graphic
    DWG graphic

    inVENTer calculation tool
    inVENTer calculation tool