inVENTer iV14V

Ideal for newly built houses

  • DIBt approved [Z-51.3-156]
  • heat recovery of up to 89%
  • suited for installation in newly built houses
  • Description

    The inVENTer iV14V is a fan with an angled wall sleeve which is especially easy to install into newly built houses where it can be fitted into a gap in the brickwork. 

    Just like every other inVENTer system for decentralized controlled ventilation, this device fulfills the expectations of the EnEV concerning the minimum change of air ventilation. In cooperation with other ecological building equipment and appliances, this ventilation unit contributes to an easy and cheap low energy or passive-house standard. 

    inVENTer iV14V, ideal for newly built houses

    Contents of delivery

    The inVENTer iV14V consists of:

    • a square wall sleeve, cut for the respective wall thickness
    • a cartridge with ceramic heat accumulator and reverse fan
    • a sealable inner cover (round or square) with dust filter
    • a powder coated, stainless steel weather protection hood in grey or white (more colors on request)
  • Technical details

    • DIBt approved: Z-51.3-156
    • Air volume flow: m³/h 13.5-28
    • Extract air performance: m³/h 27-56 
    • Heat provision level: up to 0.89 (89%)
    • Power consumption: 1-3 W
    • Wall opening in mm: 210x210
    • Wall thickness in mm: >250
    • Standard sound level difference: (dB) 36-42
    • Sound emission (dB (A)): 20-39
    • Energy efficiency category MZ/ZR: A/A
    • Temperature range in °C: -20 to +50 °C
  • Downloads

    Product overview
    inVENTer product overview »

    Installation and operating instructions
    Operation and instruction manualt for the ventilation systems inVENTer iV14R und iV14V »

    inVENTer information prospectus (short instructions, maintenance manual)
    inVENTer information prospectus »

  • Accessories

    • Inner cover R-D290, white- RAL9010 SDE
    • Inner cover Flair V-233x233, white SDE
    • Sound mat iV14
    • Sound insulation insert IB-R-D290
    • Dust filter inner cover R-D290 (2x)
    • Dust filter inner cover V-284x284 (2x)
    • Dust filter inner cover V-220x200 (2x)
    • Dust filter inner cover Flair (2x)
    • Pollen filter inner cover R-D290 (2x)
    • Pollen filter inner cover V-284x284 (2x)
    • Pollen filter inner cover V-220x200 (2x)
    • Pollen filter inner cover Flair (2x)
    • Fine filter inner cover R-D290 (2x)
    • Fine filter inner cover V-284x284
    • Fine filter inner cover Flair (2x)
    • Wind protection iV14
    • Storm blocker WSH-09
    • Round cable (33m, 3 wire)
    • Self-adhesive fabric tape, 50m x 48 mm
    • Insulation fixing set
    • 2 component foam (businesses only)
  • Upload für Architekten

    Please confirm captcha to proceed.


    Graphics for the inVENTer iV14V
    DXF graphic
    DWG graphic

    inVENTer calculation tool