Simplex mounting block
Individual assembly systems for your construction projects
- Integrated pipe with gradient
- Individual made to measure
- Error-free quick installation
- 30 minutes time saved per device
- Diffusion-tight/open according to RAL
- Professional sound decoupling
- For all wall thicknesses
The Simplex from inVENTer combines the mounting block with wall installation sleeve and slope in the shell construction for the first time – saving time and money. It also avoids complications during the subsequent installation of the decentralized ventilation system, as our Simplex mounting blocks are individually tailored to the respective construction project and delivered directly from the factory.
The ventilation concept is provided in advance by the inVENTer experts and also takes into account the planning of the individual modules. inVENTer thus offers an all-inclusive package that benefits planners, architects, and installers alike. The end customer is also happy, as they receive a tailor-made and perfectly functioning decentralized ventilation system.
Decentralized ventilation in building shellsVentilation installation in 5 steps
Your advantages with the Simplex mounting block30 minutes saved per fan installation time
Anyone who chooses the Simplex mounting block from inVENTer, you save two steps when installing the decentralized ventilation system later on: There is no need for core drilling or the subsequent installation of a wall sleeve, which requires 24 hours to cure. Craftsmen now save 30 minutes per ventilation unit when installing ventilation systems.
Depending on the wall structure, our production department tailors the mounting system for ventilation installation to the specific construction project. The wall installation sleeve is also professionally installed in accordance with the project specifications, i.e., it already has the required slope. In addition, it is integrated into the installation block in accordance with RAL standards and sound-insulated from the installation block. With this step, inVENTer takes care of the most sensitive part of the ventilation installation, ensuring that nothing stands in the way of the error-free installation of your decentralized ventilation system.
The new mounting system is integrated directly into the shell construction instead of the brick and covers masonry thicknesses from 175 to 490 millimeters. The total wall thickness, including insulation, is then adjusted using the protruding wall mounting sleeve.
The new installation solution is another addition to inVENTer’s range of services. In addition to creating a free ventilation concept, inVENTer experts now also take care of planning for the Simplex installation modules and, if required, provide advice throughout the entire installation process on site or through their own specialist training courses. As a result, the installation of inVENTer ventilation systems for tradespeople and installers is made significantly easier. At the same time, the use of Simplex mounting blocks guarantees the lowest possible error rate – with the associated time and cost advantages.
Technical detailsKey data for the Simplex mounting block
| Dimensions
|
(W x H, D depending on project)
|
| iV-Smart+ & iV14-Zero
|
260 x 249 mm
|
| aV100
|
260 x 249 mm
|
| Material
|
Neopor®
|
| Fire behavior
|
Flame retardant
|
| Min. masonry thickness
|
175 mm
|
| Max. masonry thickness
|
490 mm
|
| Total wall thickness | ≤ 715 mm |
