Pure
The basic controller with adapted switch design
Available from April 2022
- Controls up to 4 inVENTer ventilation units in the modes heat recovery and ventilation
- Own switch design with double rocker possible
- Filter change display and pause function
- Flat version for continuous operation in apartment buildings
- Safety device available when operating with open fireplaces
- Intuitive status display via LED
ComponentsThis is how the Pure Controller is constructed
Control module
In order to be able to control the inVENTer ventilation devices, the controller needs a control module. This module is used to set the individual functions, such as the change between the modes heat recovery and ventilation. The display LEDs are also connected here.
Power supply unit
This power supply unit is used to connect the Pure controller to the power source. It is available in this flush-mounted version and also in a control cabinet version. The controller power pack is installed in the boxes provided for this purpose (flush-mounted or hollow wall). See also “Accessories”.
Control unit double rocker
All functions of the Pure controller can be easily selected and set with a double rocker. It can either be selected in the inVENTer design or adapted to your own switch design. In this way, the control blends inconspicuously into the living environment.
Technical data
| Controlled iV-devices max. | 4 |
| Ventilation zones | 1 |
| Power levels | 3 |
| Pause function | 1 |
| Filter change indicator | ja |
| Deactivation lock | Version Flat |
| Mains voltage [V AC] / [Hz] | 230 / 50 |
| Input voltage [V DC] | 24 |
| Fan voltage [V DC] | 6 – 16 |
| Power consumption max. [W.] | 18 |
| Standby [W] | 2,5 |
| External switch contact | HYG / CO2 |
| Protection class | IP20 |
| Protection class | II |
| Operating temperature [°C] | 5 – 50 |
Accessories
The Pure Controller can be equipped with the following accessories:
- Sensors, e.g. CO2 sensor, hygrostat
- Safety device
- Boxes: flush-mounted, hollow wall
Manufacturer number: 1003-0141